Bonneville America Forums Forums Off Topic Discussion Forums Lounge Another New Bike

I am going to pick up a new bike tomorrow. This time it's another Triumph. 2005 America with 5,000 miles on it. After finding everything out about these Harleys I wanted another Triumph, that makes 23 bikes now.

Good to see another America appreciated.

Already bought some stuff for it. It is unmolested so going to need to remove the air injection, open the pipes, remove the air box, jet the carbs, adjust the pilot, all the stuff we haven't talked about on here in quite a while. I plan on lowering it 3" like I did Wendys America. Light bar with turn signals. Going to make another oil pressure gauge. This bike has spokes in the back and a mag in front, I already bought a spoke front wheel. I also bought an oil tep gauge. I also want to put floor boards on it, only one I ever owned with those on it except Wendys.

Picked it up today, carbs were completely shot from being put away with fuel in them and the petcock open. Thankfully I had a set I bought from a member here to try on my Speedmaster. Got home around 1 and was riding by 4. That included a quick wash and oil change first. I has been dumped but I had everything already to fix what was broken or bent. Plus some dress up stuff I had already too. It was a little rougher than I thought but not bad. Rode about 30 miles, rides straight and smooth. I got for even less than I had initially negotiated. Anybody wanna buy a Harley with S&S gear drive cams? LOL

When I blew the dirt off the neutral light lens in the dash blew off. Did anyone ever find a source for those?

Can't help you with the lens. Do you have your take off carbs soaking?

No, they are completely shot. The float seat is so badly rusted that I can't get the needles out of the seats and the jets are all corroded shut. I found the neutral light for $8. Had to buy the whole light but that works for me. It isn't the original one but an after market generic power sports green neutral light with the N in the middle and chrome bezel, won't be able to tell the difference.

Today I put open shotgun style pipes on I made from a set of stock tapered pipes. I cut the taper off and removed the baffles leaving the reducer cone and mesh on the walls with the fiberglass behind it. They sound great. I also put bullet rear blinker on with visors that clear each side of the tag by about 1/2". They are double filament so the dimmer one I hooked to my brake lights instead of the tail light and the brighter one is turn. Even though they are bulb type lights I need to install a resistor because they flash too fast. I have done a ton of stuff to this bike, it's almost what I want it to be now.

Glad to hear that you are still tinkering with a new to you middle age America. post some photos if you get a chance and maybe a sound file so we can hear those bad boy pipes.

I haven't had a photo host since photobucket started to charge.

I made the pipes I did because they sounded so good on my other bike. Nice deep sound.