Welcome to the best site for you and your speedy!!
There are two ways to adjust your shifter, The rod that comes from the tranny to the shifter has a lock nut on it, loosen it, turn the rod a few turns, then tighten the lock nut. Only turn it out a few threads thou !!! If there still isn't enough adjustment for you, loosen the lever that's attached to the spline shaft, pull it off the shaft move it(rotate)it by one spline. You can make a "witness" mark on the shaft/lever so you know where it was originally. This is a great site with good people on it. They will surly chime in, ad pics, comments and what not.
