Bonneville America Forums Forums Technical Forums General Tech 04 speedmaster, help?

Ok, been a long time, and need a little help here. Long story but I am finally trying to get my speedmaster sorted out after a hack shop tore it apart....

One problem at a time -
The pick up coil wires are red and black, and run up under the seat, under the plastic cover. They should hook to a pink/black and white/blue wires and go into the main harness. Which wire goes to which? I don't see it in the wiring diagram. http://www.bonnevilleamerica.com/forums/...true#Post588628

Thanks
Stewart

A little more detail - both connectors for the pick up coil are missing. I want to make a new connector (I'm not replacing the whole harness...not happening) so I just need to know does the pink wire match up to the black or red?
Thanks

I'll check mine tomorrow and see if i can get you an answer

Thanks!

Okay... like a week later... the red wire is connected to the white with blue stripe on my bike.

good thing he was no diffusing a bomb !
he done sat there fo' a whole week with them shakey hands an pliers

Finally getting back to this. Thank you!!!

Got the bike back together - started on the first try, runs, idles, and revs smooth.

Now I have a fuel leak... With a mirror and light, I can see it coming from the pipe between the carbs that the fuel line connects to at the r/h carb.

This is not my pic, but this is the pipe -





I can't find any parts diagrams/images of this pipe or the orings on bikebandit or anywhere else...?

That's the fuel filter... If you have a cracked fitting, I'm not sure what to say, but I replaced mine with an in-line filter and haven't had any stalling problems in years.

If you pull the carbs apart, you can check/see the O ring. Check if it rolled out of position or has a nick in it, you can bring it to your local hardware store or auto parts house and match it up.

Those o-rings dry up and crack after awhile.. you might try Bike Bandit for replacements.

If the auto parts stores can't match up your o ring, bearing houses usually can.

The local gay community should be able to service your O-ring.

Benny- it's leaking from the opposite end...
Two wheel and Chy- thanks.

I know there are orings there and they are 12 years old. I didn't see them on The bike bandit site. I stopped by the local T dealer and ordered that whole piece - should come with the orings. Like 15 bucks and will be here in a couple days, without the hassle of guessing if it will work. Will let you know.

Dog , I'll let you go check that out.

Thanks for the helpfiul posts.