Bonneville America Forums Forums General Motorcycle Forums Vendors Only Foot peg relocation brkts.

Got them back on Ebay in case anyone needs some.

I make two styles 2003-2010 $174.95 +shipping and 2011 up for $199.95+ shipping.

The later bikes have 5 more parts + extra machining of the parts.

Shipping in the US is around $10 and overseas is about $25

Des Young AAMMP

Not personally interested but a link to your store or maybe your Ebay ID or something like that so the parts are easy to find if anyone reads this.

A great idea, only thing is i don't know how to do it. I'll machine anything but computers are not my strong point, anyone care to help? Des.

Here's the 03-10 model:
http://www.ebay.com/itm/Triumph-Foot-peg...ISp&vxp=mtr

oldroadie, thanks for doing it, so how can i do it myself so i don't have to rely on you smart fellows that are computer wiz's?

When you are looking at your eBay item page highlight the entire address that's in the bar at the top, you can use your mouse putting the cursor in front of the www, hold down the mouse button and swipe right to the very end, you may have to swipe past what's visible to capture the entire addy. Then copy that, in Windows that's holding down the Ctrl key and tapping C. Then come over here and open a new post or click Edit on your current post, put the cursor where you want it and hold down the Ctrl key and press V. That'll paste the link in the post for you. You can test that link in the preview mode until you are satisfied and then post. Tada!

Basically do a cut and paste. Why didn't i think of that.

Has anyone used these? Did the the instruction get updated?
What grade bolts are being used?

I just mounted one of Des s lowering kits, great quality workmanship, proper grade fasteners and an available video that covers every aspect of the install. On top of that, he's a member here, and held in high regard. Every bit as good as a Norman Hyde kit and just as aesthetically pleasing, all for a much lower price....Maybe I should hit Des up for a sales commission?

Ryk, thanks for the recommendation, i'm always glad to hear a customer is happy. I'm in the process of making muffler end caps for one of our members "perceval" he built my website after another site builder had taken over 6 months and cobbled it together.

The end caps will slide over the od of his cutoff mufflers and should "pretty up" the view of the bike. I'm going to take pictures of them before mailing them to Taiwan where he lives, but want to wait till he gets them so i don't spoil the surprise which will probably be two weeks from now.

Looking forward to those caps!

Well i'm going to post some pictures of the first one that's finished. I sent some pictures to "perceval" in taiwan and he likes the end product. was hoping to get them both finished by now but got bronchitis a couple of weeks ago and still not fully recovered. If i can only remember how to post pictures?