A while back I put in the JC Whitney driving lights, and thought it was pretty cool that the lights came with about a foot of aluminized flexible conduit for the wires. Unfortunately, a foot is not quite enough to reach into the back of the headlight housing where the wires join in with the low-beam wiring, so you have a jumble of multi-colored wires in plain view when you turn the handlebars to the right. Well, I finally found what I wanted, the OEM supplier for the stuff that came with the light. They have this stuff in multiple sizes, so I ordered some to remedy the driving light problem, as well as dress up that big hunk of wiring harness (covered in electrical tape) that stretches between the steering yoke and gas tank. I should have it installed by next weekend, and will post photos, but here is a sample pic from the website, and the link to order it, if interested.
http://cableorganizer.com/convoshield/
