No Biggie, after taking another look at www.qtmi.com and the prices for those calipers, I think I'll stick with messing around with those TT600 Calipers. My Friend and I were bleeding our brakes, and we unbolted one of the front calipers and put the TT600 Calipers in place. From what we could tell, the mounting holes are almost dead on, the TT600 caliper takes a mounting bolt that seems to be about one MM larger in diameter than the Speedmaster bolt. There will definitely be some machine work required, looking at the caliper from the front view, the mounting bosses are a little too tall to for the caliper to fit around the rotor and with the Fork mounting points. I think having a machinist Mill both bosses evenly to take off about 3 or 4 mm, will get the calipers right about where they need to be physically, and then just fit new bolts. More on this as things develop :-) Regards to All!


Michael D. Rodriguez