Check out the new Gallery
wicked red 1100
wicked red 1100
by mag10, August 21
Windshield I need to replace
Windshield I need to replace
by philwarner, May 10
first ride
first ride
by NemoJr, April 1
Steve McQueen inspired
Steve McQueen inspired
by Feral, November 28
GaRally22
GaRally22
by chy, September 18
Previous Thread
Next Thread
Print Thread
Speedo error
#9277 04/10/2005 10:39 PM
Joined: Feb 2005
Posts: 57
BigTC Offline OP
Member
OP Offline
Member
Joined: Feb 2005
Posts: 57
Anyone checked into correcting the speedo error on these bikes yet? I checked mine the other day and it is off approx
10 mph or maybe a little more. I did a search of the archives
but didn't find any fixes for it. Anyone ask the dealer
about the problem.

Re: Speedo error
BigTC #9278 04/10/2005 11:25 PM
Joined: Jan 2005
Posts: 1,847
Learned Hand
Offline
Learned Hand
Joined: Jan 2005
Posts: 1,847
How did you "check it"? 10 mph, at what speed? Have not heard of any fixes, but have heard about an 'error', speed is so subjective.....


Warren 04 Caspian Blue and Silver America
Re: Speedo error
AngusPT #9279 04/11/2005 12:26 AM
Joined: Jan 2005
Posts: 282
Adjunct
Offline
Adjunct
Joined: Jan 2005
Posts: 282
I just put 1K miles on mine this weekend with my GPS along for the ride. The speedo is about 10% off across the range. At 75 mph, for example, the GPS indicates actual speed of 66.5

I hate it but that's typical for all bikes except Harleys.

There are two ways to fix it. The easiest is to find a gear drive reduction like hot rod car builders use to mate a Chevy trans to a Ford engine.

Another option which I've seen used on other bikes is to permenantly modify the magnetic field of the speedo's ring magnet. This can be done using a magnet from an old hard drive (very powerful) but it requires extreme skill to not over do it.

I've been searching for the exact gear drive converter but have not yet found the right combination of thread size and reduction.


Todd Richmond Grapevine, TX USA '78 R80 /7 '06 FJR1300A
Re: Speedo error
bmwhd #9280 04/11/2005 1:06 AM
Joined: Jan 2005
Posts: 129
Adjunct
Offline
Adjunct
Joined: Jan 2005
Posts: 129
The speedometer error is really frustrating. The worst part is that it was probably built this way on purpose. I recently changed my speedo so now I don't worry about it anymore. The gear drive converter would also alter the odometer and trip meters. Although my speedometer was 10% out, my odometer and tripmeter were dead on. If I'm not mistaken other poeple have found the same thing, so the drive converter doesn't really sound like a great solution to me. Altering the magnets is probably the way to go if you can manage it without doing any damage. For $300 you can get a dakota digital unit that has speedo, tach, trip and odometer, 0-60 and quarter mile times, and a buch of other features.

http://www.dakotadigital.com/Detail.cfm/-/Category=66/PartNumber=HLY-3016/product.htm

Re: Speedo error
Slug #9281 04/11/2005 1:09 AM
Joined: Jan 2005
Posts: 129
Adjunct
Offline
Adjunct
Joined: Jan 2005
Posts: 129
Or for $20 you could use a sigma BC-800.

Re: Speedo error
Slug #9282 04/11/2005 1:09 PM
Joined: Jan 2005
Posts: 485
Adjunct
Offline
Adjunct
Joined: Jan 2005
Posts: 485
On the bright side; when the Office asks "DO YOU KNOW HOW FAST YOU WERE GOING" you can truthfully answer, "heck if I know." He will then give you the info needed to do mental calculations in the future.

Re: Speedo error
bogie #9283 04/11/2005 4:47 PM
Joined: Jan 2005
Posts: 922
3/4 Throttle
Offline
3/4 Throttle
Joined: Jan 2005
Posts: 922
Older speedos had an adjustable connecting point for the needle return spring. Just move that till you get a proper reading.

Of course, the hard part is getting the speedo head apart. There is a gauge rebuilding company on the west coast, which does older Triumph speedos and tachs. They might be able to help with this.

If a guy had an "old" speedo to play with, I'll be he could determine where to drill an access hole so he could get at the needle return spring anchor. Then, using a dental pick or o-ring pick, move that anchor point to give a proper reading.

To finish, install a small, black rubber plug in the just-drilled hole.

Do older Triumph models use somewhat the same speedo? A fellow in a "big city", where there's bound to be a motorcycle junkyard, could get one to play with. Once he figured it out, he could do this mod for others (and maybe do ignition box rev limiter mods, too).

Greybeard, Dinqua, Grump, Sal Maglie, Arsenalfan, I hear destiny calling one of you....

Re: Speedo error
PapaDean #9284 04/11/2005 5:50 PM
Joined: Jan 2005
Posts: 282
Adjunct
Offline
Adjunct
Joined: Jan 2005
Posts: 282
I would pay big money to anyone that could calibrate my speedo. I hate it being off.


Todd Richmond Grapevine, TX USA '78 R80 /7 '06 FJR1300A
Re: Speedo error
bmwhd #9285 04/11/2005 6:10 PM
Joined: Jan 2005
Posts: 1,500
Learned Hand
Offline
Learned Hand
Joined: Jan 2005
Posts: 1,500
I just pretend that my speedo is correct. It makes me feel like I'm really fast.


Learning from my mistakes... again and again.
Re: Speedo error
nuthin #9286 04/12/2005 9:21 AM
Joined: Jan 2005
Posts: 6,308
Likes: 4
Worn Saddle
Offline
Worn Saddle
Joined: Jan 2005
Posts: 6,308
Likes: 4
I'm with you nuthin, I can hit the ton in 3rd gear right before the rev limiter kicks in.


A word to the wise is not necessary. It is the stupid ones who need the advice. Pat
Re: Speedo error
BigTC #9287 04/12/2005 3:47 PM
Joined: Jan 2005
Posts: 8,639
Likes: 3
Old Hand
Offline
Old Hand
Joined: Jan 2005
Posts: 8,639
Likes: 3
Mine is spot on at 0. From there on, it seems to increase in error to about + 10 mph at an indicated 40, and seems to hold that to as fast as I'll go. Once, I passed a radar wagon that has a huge display showing your speed. It said 42 and my speedometer said 52. I wish I could use the tach to determine my speed, but it's off the other way, showing 6800 when I hit the rev limit.


Let's hope there's intelligent life somewhere in space 'cause it's buggar all down here. -- Monte Python
Re: Speedo error
Greybeard #9288 04/13/2005 8:47 AM
Joined: Feb 2005
Posts: 57
BigTC Offline OP
Member
OP Offline
Member
Joined: Feb 2005
Posts: 57
Finding a way to recalibrate would be great I'll have
to start searching out something. I don't even know
exactly how far off I am. They put radar warning signs up
all the time here but nowhere that I can get a run at one
doing 60 mph. I just got beside my buddy in his truck to
get a rough idea. In the mean time I can be a tough guy
and tell people "Yeah I do 80 in school zones on my bike."


Moderated by  bennybmn, chy, mert 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.4