They are Arlen Ness. Heres a link.
Small SignalsIt is very simple wiring. You just connect your positve wire to the existing wire and you need to connect a wire from the light to the ground wire. I used a washer type butt connector and put that over the mounting screw. When you take off your lisc plate you can see the nuts and wires.
As far as the other question goes, If it's a light and you can mount it, you should be able to use it. There is a small obsticle with LED lights. They will require different flashers or some wiring adjustments, but not that difficult. There are some threads around here that address this issue.
Heres one...
http://www.bonnevilleamerica.com/forums/...p;page=3#132806Welcome aboard!
