Bad news is I don't have a scanner so I can't put up the dyno printout. My setup is Epcos, Freak, 155 mains, 45 pilots, TBS needles with no shims.
Almost feel like I wasted $30, but I'm glad it was only $30. They measured a peak 76.97 hp at 7200 rpm, and peak torque was 56.16. Now I told the guy this can't be right. I've seen enough dynos posted here to know that there's no way a Freak is going to put out that kind of hp. He said that their dyno was spot on having run many Victorys(my run was at a Victory dealer) through it getting 85hp out of the box from their 100 inch motors. I still don't believe him though that this dyno is accurate.
They couldn't measure air/fuel ratio, because their dyno doesn't have that capability. Torque and HP have a slight dip from ~4700 rpm to ~6500 rpm, but the dip is only about 3 ft/lb. Horsepower shows a similar dip as expected, but nothing dramatic.
I wish there was another dyno here locally for the same price as they charged for a run so I could compare.
