ok i went with the mikuni 36MM flatslids with NO PUMP and this is why...
first i went with mikuni's because here in the U.S.A i can get part's for them at any bike shop..then i had to find out what kind of mikuni carb i wanted to use.. at first i was going to use round slids but saw that i could get flat slids for only $30 buck's more so i went with the flat slids and guys this is the reasone i went with the mikuni 36MM f.S i can get main jet's from #50 to #200 in increment's of 5 #200 to #720 increment's of 10
pilot jet's #10 to #40 increment's of 2.5 #40 to #100 increment's of 5 #100 to #120 increment's of 10 and at least 6 diffrent needles that give me alot of range to play with and get these carb's set up the way i wanted...ok this why i did not go with the Accelerator Pump first of all it cost alot more and for what one cost i could get 2 with no pump..and i feel that our bike's don't rev fast enough to really need the pump.. meaning our bike does not go from 0 RPM'S to 7500 RPM'S fast enough but that is just me i am sure there are othere's out that feel that the pump works better for them..
and also these carb's go on our bike's very easy with out much work.. yes it take me some time to get the jetting right but now that i have that worked out i am very happy with these carb's and thay are a big step over the stock carb's
BIKER
