Warm up your engine to get the oil up to operating temp. Place a flat container under the front of engine and remove the drain plug. Allow the oil to drain until it stops. Move pan backwards a little and remove the oil filter.
Wipe everything off real good and install new oil filter. Be sure to put a smear of oil on the o-ring/sealing gasket of the new filter. Be sure the drain plug is in the motor and put in new oil. I will use the entire gallon (4 quarts).
Check out the kit from Brent at www.newspeedmaster.com
For under $50.00 you get everything you need and you might
live close enough to pick it up thereby avoiding shipping costs. Also, Brent's kit comes with a new sealing washer for the drain plug

Tony G '03 America