I made mine myself, I cut up some aluminium plate from work using jig-saw and sprayed them with black satin pressure pack. Cost about A$5.00 and 2 hours work, give it a go if you have a jig-saw and drill. I removed the little stubs on back of pegs so I could use them to replace bottom bolt. The left side is similar but without the section cut out to hold the tag.
TBA, Stainless extractors / drag pipes, 65mm over forward controls, Thruxton needles, 904cc, head ported, lowered 1-inch, Console removed, relocated battery box, Australia.
| 
