Yes and no Robert!
There's enough of a drop on them that the filament
will turn off and on. However, there is enough juice getting through from the run that it does not turn them completely off so it's not as distinct as regular turn lights but they do suffice. I was mainly going for run and brake anyway.
However, I have been thinking about re-doing them to eliminate this 'problem'. I just have to get some time to sit down and draw it up. The biggest problem with our bikes is the way things are wired. It was literally trial end error with the isolation diodes to get it working. When I first hooked everything up, the turn signal activated the brake light!!
Working through it, I added the diodes to eliminate feedback and you see the result. There has to be a better way though....
