Quote:

I'm gonna go out on a limb and say the Thrux needles are too rich, but just a gut feeling. I'll let Pat confirm my natural talents.



I had the Bike dynoed with the current setup.
It pulled just a tad under 70hp.
The dyno confirmed a moderate climb to around 5000rpm then started to go up stong to redline.
I had TBS Needles in before with 2 shims.
Do you think I should try them again with a shim or two?
I think Dazco runs them with 2 shims & has had good results.

Last edited by dowop; 07/30/2006 6:17 AM.