Bonneville America Forums Forums Technical Forums General Tech uneven tire wear

I've noticed that my front tire has excessive wear on the left side. I realize because of the crown on most roads this will happen but this seems excessive. I order new Avons last week and they're scheduled to be put on the bike Saturday. However, I'm wondering if something else is wrong with the front end. That front tire only has 6700 miles on it. I thought I should get at least 10K.

Check your forks, something could have come loose. Could be an alignment issue.

Certainly the above post recommendation. Also get her spin balanced again. Make sure the headstock steering is tight as well. In my case the originals had good wear and balance on the front and these were the 2002 America Bridgestones that a lot of people hate. My first replacement was the Avons and the third replacement were Metzler ME330's and then Lasertech fronts. I got the best mileage out of the Metzlers (15,000 mi.) but the balance and even wearing on the fronts was the best with the Avons. They just rolled better, less cupping and wobble free (no hands riding) I think you'll be really happy with the Avons. Just get your alignment sorted and make sure everything up front it tight and the headstock bearings are in good shape.

Thanks guys

You can be sure that you have an alignment problem.Another thing to remember is to keep the pressures up.(set cold)
One more thing--if the tires are cupping on the front-Your fork springs have probably had it or arn't enough pressure to keep the tire to the pavement.You'd be surprised at how many bikes (new ones) that come from the factory with to light of springs.A 1800 GoldWing is a great example- I went through this about 5 months ago-bike had 9600miles on it. Take a look @ Traxxion.com -they are not the only "game in town". Especially for our English bikes.
Hope this helps.
Kenny