Quote:

Quote:

Like I said. ALL OF THESE BULBS WORK IN MY CONSOLE IN ANY DIRECTION.


But, are they the only LEDS you have installed. Chances are (almost guaranteed) if you replace your front and rear siganls with LEDS, you will have a problem without installing any diodes. You will end up with the hazard light flash effect.

Soren


My only difference is that I have replaced my turn signals with some arlen ness ones. They are not LED's either, just regular bulbs?? Here are the ones I have.
http://www.cruisercustomizing.com/detail..._Marker_Lights_
I'm sure if you have LED signals there would be something different.
I thought we were only refering to the console LED light swapping here. If that is the case and all someone has is regular bulb turn signals then you do not need to do anything other than swap the console bulbs with the LED ones and direction doesn't matter. well depending on your throttle position (yes i'm kidding about the throttle)

06BA,-AI,NoBfls,K&NPods,TBS,155/45,2 3/4Out,SidGapPlgs,Wirsnbrs NawImPrityFknFarFrmOkMan