Carbs Sync

Check out the new Gallery

wicked red 1100
by mag10, August 21

first ride
by NemoJr, April 1

Steve McQueen inspired
by Feral, November 28

GaRally22
by chy, September 18

Print Thread

Re: SS screws Reido113 #77724 07/09/2006 1:30 PM
Joined: Jul 2006 Posts: 15 Dunnellon, FL bollen8 Complete Newb
bollen8 Complete Newb Joined: Jul 2006 Posts: 15 Dunnellon, FL	While poking around the carbs I noted that the stainless allen screws were too long for the lids at the inside holes. They bottomed out with one lockwasher, and I had to use two to cinch the lids down tight. stu 2001 Bonneville 2003 Ninja 250

Entire Thread
Subject	Posted By	Posted
Carbs Sync	ScottP	07/07/2006 11:07 AM
Re: Carbs Sync	Reido113	07/07/2006 12:46 PM
Re: Carbs Sync	ScottP	07/07/2006 2:13 PM
Re: Carbs Sync	ScottP	07/07/2006 2:17 PM
Re: Carbs Sync	EnglishYankee	07/07/2006 2:48 PM
Re: Carbs Sync	bennybmn	07/07/2006 2:59 PM
Re: Carbs Sync	Erwin	07/08/2006 1:12 PM
Re: Carbs Sync	Reido113	07/08/2006 4:05 PM
Re: Carbs Sync	Erwin	07/09/2006 12:27 PM
Re: Carbs Sync	Reido113	07/10/2006 1:50 AM
TBS needles vs. Thruxton needles	Donnie_Fair	09/01/2006 1:45 AM
Get the right screwdriver	Donnie_Fair	09/01/2006 1:56 AM
Re: Carbs Sync	Reido113	07/07/2006 7:45 PM
Re: SS screws	bollen8	07/09/2006 5:30 PM
Re: SS screws	bennybmn	07/09/2006 11:44 PM
Re: SS screws	bonnyusa	07/10/2006 2:04 AM
Re: SS screws	ScottP	07/10/2006 2:31 PM
Re: SS screws	bonnyusa	07/10/2006 3:00 PM
Re: SS screws	Reido113	07/10/2006 7:52 PM
Re: SS screws	Erwin	07/11/2006 8:31 PM
Re: Carbs Sync	BikerT	07/15/2006 4:38 AM
Re: Carbs Sync	Big_Poppy	07/17/2006 7:35 PM
Re: Carbs Sync	ctmike	07/18/2006 1:51 AM
Re: Carbs Sync	Crusty	08/31/2006 8:25 PM
Re: Carbs Sync	bonnyusa	08/31/2006 8:32 PM
Re: Carbs Sync	Crusty	08/31/2006 8:37 PM
Re: Carbs Sync	Anonymous	08/31/2006 9:35 PM
Re: Carbs Sync	sweatmachine	08/31/2006 11:45 PM

Moderated by chy, Dinqua, freedom

Link Copied to Clipboard

Bonneville America Forums Forums Technical Forums Performance Mods Carbs Sync