This is not the first time I’ve read this on the POST & it frightens me...
The way 2 do the front end is WAY DIFFRENT than what I keep reading on this site.
The 1-2" Progressive lowering kit comes w/2 PVC spacers, directions, stickers, 4 springs (for below the damper), 2 Main springs & 2 washers.
*I'm posting the Kit in my gallery now*
The actual lowering starts below the damper push rod w/replacement of the existing stock springs to the progressive sm. springs (1 spring to lower 1") or (2 springs for 2").
The main springs & PVC spacers are pre cut to size for U in the kit. If the PVC spacers are not pre cut, they have a guide that shows the length for 1" or 2" lowering.
I've done a few front ends over the years & you need to disassemble (unfortunately) them completely if you want the performance that they have the potential to truly give you.
NOTES:
1. It wont take long, I can do it in an hour (messy job)
2. Get the Progressive Kit (10-1564) it’s only $80 4 God’s sake!
I’m NOT saying you can’t do it the LAZY WAY with spacers & springs…I’m just saying, get the kit & do it the right way.
Member
Gary James
