Hey Tsalagi, thought that pic might elicit some comments. The 6'- 4" guy is my son GREG (roper) who is designing this bike. Almost everything done here are his ideas. And yes, the bike has been lowered 2-1/4" in the rear with our lowering blocks, and almost 2" in front using modified stock springs and internal stops. The pipes were on the bike when we got it. Best we can determine by the mounting brackets is a set of aftermarket units for a Harley, or generic applications. Probably came from JCW. They work quite well on this bike after the carb work. Kind of loud by my standards, but nice and deep, a rumbly sound. They really let the engine breathe. Although low, we haven't had any major ground clearance issues as of yet, and Greg likes to ride hard! Thanks for the good words.
