ok, here's my story...got mike sr.'s (oldmike) holesaw from Bob (talcecom) a week or 2 ago...since I only have a 3/8 drill, I rounded up a 1/2" drill from a buddy...but before I received the holesaw from UPS, I was impatient and remembered seeing a few posts about how some guys wiggled, bent or pounded out their baffles...so I thought I'd get a jumpstart on things and I did this (to my stock pipes)...I quickly realized that mike's holesaw was not going to be much good to me now, so I went out and bought a 3" holesaw and an extension for it...no good either...by bending, wiggling and pounding out the baffles, I warped the sh!t out of the baffle plates...the holesaw wanders WAY too much on the uneven surface. So I decided, what the hey...lets drill out the TOR's, they're too quiet for me anyway...That went smooth as anything, and I love the sound. My wife and I went on a ride for Cystic Fibrosis today, about 200km round trip...it was cold and windy and cloudy and rained a little bit, but was good...I'm very happy with the drilled out TOR's. So, to wrap this up, the holesaw is now available to the next person who wants it. PM me particulars, I pay shipping, as it was paid to get it to me.
edit: just in case I wasn't clear, I DID use mike's holesaw to drill out the TOR's, and it worked very nicely.
Last edited by Old_Wolf; 05/27/2006 10:18 PM.
