Bonneville America Forums Forums Technical Forums Exhaust Exhausts on Ebay

Ok here's what I got going on.

Like I said, I had him drill an extra hole in the plates.
06 TBA AI's removed, stock jets. I removed the snorkels and have my mixture set at 2 3/4 turns. This was 1/2 turn more than the factory setting. I have no popping on decel and the pipes continue to get louder. they sound great. After doing this I am very glad that I did not spend twice as much for the Epcos I was gonna get (hint hint). He thought I may have to re-jet, but I don't need to. I plan on re-jetting to 132's if I cut open my airbox. I don't even know if I'm going to. The performance has been increased 10 fold. I had a feeling that this bike could do more than the factory settings.
I would not hessitate to buy these pipes. I think that the way he normally does it with 2 holes drilled was a little to quite for me. The extra hole put it right where it needs to be. I almost wanted another hole but It is getting louder every mile. I think it will top off in another 500 miles or so.