Hello,
Just like to share my Dyno results so far;
I did a Dyno last year with TOR pipes, modified airbox (all snorkels out + UNI), 145 main, 45 low. It gave me 55 hp/61 Nm torque. But this set up was to rich in the low so I canged to 42 low. Now I have fitted Thunderbike pipes and it start popping so I went up to 45 low again. Today I did a new Dyno and now I got 65 HP/65 Nm torque and the advise to increase main jet to 152 -155 since it is now running on the lean side. Also the advise to decrease the pilot 1/4 turn. It is running nice and pulls all the way.
I will be back with more info after I have put in bigger main. And with some graphs.
