I finally got the top triple done and assembled. It looks like it belongs on there. As I had the deuce risers on the bike and wanted to keep them, I had to get a new pair of risers that still have the bosses on the lower ends and make caps to fit the isolators. The new riser is an inch up and some back and is a little tight on the brake line and the clutch cable. Working with Fast Eddy to source some new ones.

I have taken pictures as the project progresses and will post them when all done.

05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter