Fellow RAT'S, broke ground for a new garage at our house in Wilkesboro NC where we moved to from San Diego. Would like some input/ ideas regarding the layout.
Building is going to be 40ft. wide x 30 ft.deep with 10 or 12ft. ceiling and access to the attic space upstairs. 3 garage doors on the front and 1 door( reg size) on the right hand end.
Three windows on the back wall at least 4 ft. wide and 2 windows on each end 4ft wide.
Putting my lift in the left hand bay and the ceiling will be recessed enough to allow a vehicle to be on top at full height.
Lathe and mill on the right side end wall and stairs accessing the attic against the back wall on the right too.
Will be fully wired and plumbed for 110 and 220v.
What kind of floor sealer/ epoxy works good, don't forget the floor space is 1200 sq. ft. and it all needs covering.
Driveway to the garage will be 10 feet wide x 150 ft long leading to a concrete pad that is 40 ft. wide x 15ft. deep in front of the garage.
