Thanks Ken. As I don’t have a vaccum pump I opted to do it the old fashioned way . First, I removed the right caliper off of the rotor and moved it over to left side . I placed a metal shim that I made for bleeding brakes between the pads and zipped tied it in place. I used this hydraulic brake bleeder from Fast Eddy
https://www.fasteddysports.com/products-page/?product_id=788 on the bleed valve. I then had to hold the right caliper up towards the left side of the handle bar with the brake line bolt ABOVE the bleed valve while my wife pumped the brake lever and I bleed the brake caliper. For the left side i placed the shim between the pads but had to to let the caliper hang straight down towards the ground. That procedure gave me a super stiff brake pull with no squish, I cannot pull the lever back to touch the throttle. I hope this helps you guys down the road.
