Hey All,
Another 101 question from the uninformed. I bought the 12 volt retro horn from JC Whitney. Because I have the engine guards on from Ma's it won't bolt in between the mounting tabs. I made a bracket to mount it on that will fit under the mounting plate for the light bar.
So, I have to splice some wire in to make the leads long enough. I was standing looking at the wire at Home Depot and grabbed 16 gauge primary wire. Got home and compared them and I guessed wrong. Looks like the horn wires are actually 18 gauge. So...do I have to return this or can I use the 16?
You can stop laughing now...I'm trying here.
BB
