Quote:


Just an update.The speedometer is working accurately again.All it needed was a little cleaning.Before it was reassembled I cleaned off the old grease on the gears and applied synthetic SuperLube grease which is safe for plastic. Most difficult part of the job was the bezel so I modified it to make it easier to take off in the future.Basically that involved trimming the bezel where it folds onto the speedo body, leaving a tab every 3/4" to clamp it to the body.Used a dremel tool for that.Liked the Andy Griffith video. Thanks again for all the input.



Glad to know that it's working great again. Nothing beats a good old-fashioned cleaning.