Kevin,
You don't say if your exhaust is modified. That would be helpful to know. If the pod filters are K&N pod filters, then 125 jets are too small by far. Have you tried Dinqua's
jetting calculatior? That calculates the K&N pods to use 145 jets with your mods. Also, just by the fact that you say it runs better on the choke tells me you are too lean. It sounds like you have really opened up the air intake, now what about the exhaust? If you open things up going in then you need to open things up going out too.
Here's my guess. If you are running K&N Pod Filters and haven't done anything to your pipes, you could run 135 to 145 jets. If your pipes are modified or aftermarket, then you could run 145 to 155 jets. Quite a difference from where you are now. Try 145 jets to start, and consider opening up your pipes. There's lots of discussion around here about that. I wouldn't mess with the floats until you try different jets.
That's just my opinion. Every disclaimer you can think of applies here.
Hope that helps,
Cody
