Hey there, very sorry about the months late reply, but I can't seem to make the right selections to get email notices of posts to me from this site. Anyway, the "slicer" was home-made by yours truly. Couldn't seem to find one I was happy with on the web or eBay. Got me some aluminum sheet from Ace Hardware and cut out the shape and did the finishing work on the edges. Then took it to a local powder coater for the black, and finally, I had a local sign company do the Triumph logo in adhesive white vinyl with gold outline. I also did some very fine 16th-inch gold pin stripe around the edge that you might not be able to see from the picture. It is held to the fender with 90 degree black plastic brackets and 3M double sided automotive emblem tape. I crazy-glued on some small gold acorn nuts to the brackets to simulate mounting bolts. All in all it turned out pretty cool.
