$214 CDI showed up, installed and started per instructions, no help. Spitting and sputtering, then dies. Placed a strobe timing light on left and right plug wires, increase throttle to about 2000, and strobe simply stops on both plugs, just like someone switching the ignition off.
Removed kill switch, disassembled, inspected, re-installed. Disconnected kick stand switch, no effect. Disconnected crank sensor with engine running, engine continued to run (how I have no idea), Removed fuse box and inspected all connections, all solid.. Shook entire wiring harness with engine running, no effect (still idles fine until plugs stop firing). Shot resistance readings through ignition switch, rock solid.
Battery charging 13.5 to 14.3, and at this point, Im clueless without a wiring diagram. Any help or suggestions welcome.....Definitely an electrical problem..MY FAVORITE
