Quote: SDKimo, thank's for the "plug". I tried moving them forward and i did the left one no problem. The right one caused me all kinds of problems with moving the master cyl. forward, it got too close to the exhaust pipe for my liking so i had to scrap the idea. Safety has to be the #1 priority and i couldn't see any other way to move it forward without getting the master cyl. boiled. If anyone has an idea please let me know. I've had many requests to move them forward but had to turn them down.
I did a forward extension for a local guy maybe 8 years ago. I made aluminum adapter blocks to move the shifter forward (and longer rod) on the brake side I made a plate to move the peg mount, left the brake stuff in place and extended the brake pedal. The brake pedal extension was a cut and paste because that is what the guy wanted, a new pedal could be made instead (and look better).
I was looking for pix of this but have yet to find them.
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
