Quote:

i have to go from 1/4 throttle to 3/5 throttle and drop a gear to keep moving
is what i mean by power loss



Had a bad coil once. Once the bike warmed up (around 50 miles) it would do, er, I would have to do just as you wrote above.

Now if you think it is a coil, buy one. Install it. No change? reinstall the one you took out and place the new coil in place of the other coil.

The procom needs to be 'set' to the correct dial position. Choose this 'correct' dial position based on how the bike runs, not as per the documentation. Search for chy's odyssey with installing and selecting the dial position in one of his threads about a year or two ago.

You had posted that your were going to purchase some coils. Sorta why I didn't post then. However, the nology coils are sorta okay, but the nology wires are no better than the NGK wires. save your money.

Blowing gravel off rural roads