Quote:

How do they attach to the swing arm so they don't turn into a hinge between the shock and the block?

I have a set of Work's shocks, so I have already paid too much for them LOL... but, yes, longer shocks would be the easy solution.



They are a 3 sided steel block. They hook under and lay over the swingarm and bolt onto the lower shock mount. Another shock nipple is two inches back from the one you used to bolt the block onto the swing arm. It can't ride up because of the lower lip and can't swing down because the top lip on on the swing arm.

By moving the shock mount back it lowers the angle of the shock and lowers the bike. So by moving it forward it would appear you would accomplish the same thing.

Here is one just riding on top of the swing arm. The anchor bolt is the old Shock support then the shock is bolted behind in the new hole.


I try to aggravate one person a day. Today may be your day.