Quote:
500 will get you a very plain paint job, 1500 gets you a nice paint job that will last. But heck, i would do it myself, get a little bondo putty, fill in your dents and a little sanding, you would be supprisedd how easy (sanding is work though) it is, get some decent 1k primer , black sand it, then paint (4 coats minumum) than a really good 2k clear coat (only good once mixed for 24 hours , so make sure all is ready for clear) about 3 coats and it will likley look pretty darn good. Cost = likley about 300 buks or less for material, a bit of time and .......
That is just the catch, $1500 gets me a brand new set of tins from the dealership. I'm going to call a few places but I was hoping to be able to get the body work and a paint job equal to that of the
factory finish for around $800.
2006 865 Neon Blue/Jet Black Speedmaster,790cams, TTP Stage 2 Firestarter, Epco Exhaust with 10.25" Samson Vrod baffles, UNI pods with 40 pilots, 150 mains,Thruxton needles, 3 turns out.
| 
