Bonneville America Forums Forums Technical Forums Custom Corner New pegs are on the bike.

Well, I finally modified the shifter and brake levers to accept a matched set of Kuryakin retro pegs and shifter peg and brake pad. Photos are in my gallery. What do you guys think?

Eric,
Very Nice. Do you mind throwing out some part numbers, prices and such.
Later
Paul

Ok, the pegs are here: J&P Cycles retro peg page

And the adapters to fit the pegs to the stock mounts are here: Ma's Cycle footpeg adapter

I had to cut the welded shifter nub off and grind it flat, then drill a hole to mount the shifter peg. The brake pad from Kuryakyn had to be ground out in back a little so it would fit flush on the stock lever, then I just drilled the mount hole.