|
|
 Handle bar end turn indicators
|
Joined: Apr 2014
Posts: 67
Member
|
OP
Member
Joined: Apr 2014
Posts: 67 |
Out of all the different ways to relocate or change turn indicators I thought these from Bella Corse were pretty cool. They warn that you can't install these on closed end stock bars but couldn't you just drill or chop the ends of the bars off? 
Just because you are a character doesn't mean you have character....
Mr.Wolf
|
|
|
Re: Handle bar end turn indicators
|
Joined: May 2010
Posts: 5,720
Check Pants
|
|
Check Pants
Joined: May 2010
Posts: 5,720 |
If you chop your bars, you will wish you had bar end mirrors, because you will get nothing but a view of your arms. Drill them out. Tapered spiral reamers work the smoothest, IMO. 
|
|
|
Re: Handle bar end turn indicators
|
Joined: Apr 2014
Posts: 67
Member
|
|
OP
Member
Joined: Apr 2014
Posts: 67 |
That's what I was thinking Ryk. You're the man. Do you think they will work with ISO grips?
Just because you are a character doesn't mean you have character....
Mr.Wolf
|
|
|
Re: Handle bar end turn indicators
|
Joined: Jul 2011
Posts: 2,212
Oil Expert
|
|
Oil Expert
Joined: Jul 2011
Posts: 2,212 |
how would those be held in place? You won't be able to get to the nut in order to swell the rubber insert if i see that correctly, unless you cut another whole just big enough to get small plyers or something in there, or gluer them in?
2007 Speedmaster and miss it!
2013 T-Bird Storm and Luvin it!
Catching a yellow jacket in your shirt at 70 mph can double your vocabulary
|
|
|
Re: Handle bar end turn indicators
|
Joined: May 2010
Posts: 5,720
Check Pants
|
|
Check Pants
Joined: May 2010
Posts: 5,720 |
Quote:
That's what I was thinking Ryk. You're the man. Do you think they will work with ISO grips?
I have bar end signals on my pseudo bobber with Iso grips, but they marry up with the Kury Iso s bolt pattern in lieu of caps. I vote you can make them work, just make sure you hone out the threaded plugs to a minimum inside diameter for the expanders on your signals. They look really nice, post a picture when your done.
|
|
|
Re: Handle bar end turn indicators
|
Joined: Apr 2007
Posts: 3,063 Likes: 8
Loquacious
|
|
Loquacious
Joined: Apr 2007
Posts: 3,063 Likes: 8 |
Here are some pictures of the ISO grip led lights I installed. They function as yellow running lights and will flash as turn signals. Got them from New Bonneville but they have them listed as discontinued however on THIS LINK they are still showing them as available.  
12 Rocket Roadster
03 Bonneville America
69 BSA Firebird Scrambler
73 Yamaha TX 750
|
|
|
Re: Handle bar end turn indicators
|
Joined: Apr 2014
Posts: 67
Member
|
|
OP
Member
Joined: Apr 2014
Posts: 67 |
Hi Greg
They look pretty sweet. Would you consider using them as your primary turn signals as opposed to just using as running lights? The cost is about twice as much as the ones I posted but, for a plug and play deal it would probably be worth the extra bucks.
Just because you are a character doesn't mean you have character....
Mr.Wolf
|
|
|
|
|
|
|
