Now with video!

http://youtu.be/80OMGcsONk4

Use headphones!

Here's a quick test of my DIY arrays made with sixteen 3-inch drivers per array. The drivers came from Taiwan, on a factory sale at about $3 each. The sub was not turned on. Only the arrays.

I played back a mix of different songs from my MBP going out from AULab, a software that allows me to add effects (VSTs, like in this case some EQ) system wide on my MBP. Recording was done with a Blue Yeti mic, going into my little old PowerBook G4 and using Audacity.

I had to boost the gain a little this time around, as my neighbours were around and I didn't want to play at "reference" level! So, there is a bit of white noise on the recording.

Assembled in iMovie, no tweaking other than cutting out some video parts... even forgot to add transitions!

Here's a run down of the video:

1:38 testing with two makeshift boxes using a single driver each.
3:50 Folk song.
5:32 World.
6:45 My cat passing by!
7:22 Electronic.
8:27 Choir.
9:36 Classic Rock.
11:08 Grunge.
12:00 Cat again!

Thanks for watching/listening!

My new venture: http://www.voglosounds.com