Quote:
The Denali Powerhub2 connections are either always on or switched with ignition
Right, the position of the 30 Amp main fuse determines whether it's always on or switched. Right now I have heated gear connected straight to the battery posts and want to add power for the GPS. I think I would, like you, prefer to have the heated gear (Warm-n-Safe) controller and the GPS both in a switched mode. The battery charger could probably be connected straight to the battery posts or to the input side of the Hub. I like your idea of connecting the phone charger to an "always on" circuit. I wonder if there's a way to split the circuits inside the hub and put 2 30 amp fuses in?! Or, could just use the powered accessory plug under the tank.
Thanks for the feedback!
Last edited by rwright; 04/22/2014 6:45 PM.
