Quote:

Buy those or. Get 5 feet of clear tube at the depot.
Stretch it over the bleeder and crack it open.
put the other end in the res
Pump the brake and fill it as needed
You'll pump a the air into the res and it'll bubble out and you'll recycle the fluid.

Close it and you're done. I can pump and rebleed if u want.

I did my rear this way by my self in 5 min 3 times last week (I had issues with thr brake switch)



That is a great way to do it. I have the speed bleeders and they work fine if you have some brake pressure to begin with. If you are starting from scratch you have to start off the old fashioned way until you get some pressure then you can switch to the speed bleeders.

Bill. "I spent a lot of money on booze, birds and fast cars. The rest I just squandered." -George Best