Quote:
Sam, I wish the detailed pics I took a couple years ago and while I built the mid-peg controls were still around, but unfortunately some time a while back I must have accidently deleted them somehow, because I just can not find them anywhere.
And yes, the harder part was designing the right-side rear brake master cylinder bracket and making the pivot point for the stock brake lever. The shift lever on the left side is off a standard Bonneville and just slides right on the spindle.
Tue Sep 02 2008
Well then these are not the controls, but image shack (or using the wayback machine) might hold the originals of the control fabrication.
Last edited by moe; 10/05/2013 7:00 AM.
