SO not sure if this bike has been laid down before i bought it or not, but the handlbar and the front tire are out a bit and the bike does pull from left to right if you let go the bars, which i don't do oftern :-) i am going to try and re-aling everything, not much in here but on other sites this is what they are saying, agree, disagree? hints?
1. Loosen the bottom yoke bolts, the fender bolts and the fender plate (the one under the fender)
2. Loosen off both axle pinch bolts on each side.
(Now should one loosen the steering stem nut as well? What about the actual axle bolt? )
Of so with what bolts are loose sit on the bike and from the top down give the forks a few good pumps, check the alignment with the sterring and the front tire and if okee dokee go from side to side bit by bit tighting it all back up.
??
