Quote:
I removed mine just recently. Took about 3/4 of an hour. I used the instructions that came with my kit(Thunderbike air injection removal kit). very basic and straight forward. I never adjusted the idle mixture, didn't seem to be any need. But the difference to the over run was astounding. I have the short TOR's and it just constantly farted. Don't know how the previous owner put up with it.
Since then I have added a K&N replacement filter and installed a Dynojet stage one kit. Again pretty straight forward with the instructions that came with the kit. Did adjust idle mixture with this mod though, still need to go another 1/4 turn I think to get it just right. 
05 Speedmaster,Reverse Cone Shortys,Thunderbike AIR Kit,K&N Air Filter,Snorkel Removed,Dynojet Stage 1 Kit(126 main),Needle-Clip 1 From Bottom,42 Pilot,NGK Iridium Plugs,Progressive Springs,Hagon 2810's,Barnett Green Springs,TTP Safe-Start,MOSFET R/R
| 
