Quote:
hello all, i am in the process of running stealth electrical and relocating my turn signals on my 2006 TBA. i bought the BC relocators for the turn signals but since i have highway bars, the do not fit correctly. i love the look of the 2011 and up turn signal bar. i was wondering if anyone with a 2011 and up TBA could take a pic of the underside so i can see how the bar mounts? if you were especially nice if you could take some measurements of where the holes are, that would be great too. my thanks in advance.
just so we are talking about the same thing. you are looking for the holes in the lower tripple clamp right?
if so, on the 2012 there are 2 each M8 threaded holes in the underside of the lower triple. the right to left centerline spacing of the ones you are looking for is 80mm.
if its any help that is the same as the spacing on my 05 as well (except those are thru holes)
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
| 
