Sorry guys.. Little JR is 11 months old & my job has had me swamped. I'd like to sell a few off for whatever they cost me to get made plus whatever any member would want to pitch in to help me cover paying the CAD guy who set up the program. I figure if 10-12 guys want to get them & they pitched in $15 bucks above whatever they charge me to make them, I'd be happy.. I have $300 bucks tied up in the original set including the CAD work. These are 1/2 alum plate that is cut on a water-jet & only a single copy. Additional sets would cost much less, especially if they were going to make a number of copies. If I could get a head count of who is seriously interested, I'll get a price from them... Selling price would be whatever they charge + shipping + any "donation" to help me feel like I didn't just blow as much money as I did...
I would propose I make a couple alterations now that I have installed these. Mostly, they are inconsequential, but would allow some flexibility to anyone choosing different rear-sets to install.
1] I will modify the mounting bolt hole locations. Only two are needed & one bolt head interfered with a peg mount anyway. I originally intended to recess the mounting bolts, but that required additional machine time, & I had to cut costs.
2] Minor change to the area where the rear-sets attach is needed to allow for other pegs & to clearance a piece of the frame just in front of the swing arm. I had to grind a bit away in order to fit one of the bolts.
3] I would recommend that the holes to bolt the rear sets be drilled at the time of install, rather than at the machine shop. Primarily, this would be to allow different donor parts to be used. I trust anyone wanting to do this would be competent enough to get 6 holes in the right place.
FYI-- sure, I blew off posting anything here (don't shoot me), but I found time to make mod #3 this year..
http://www.bonnevilleamerica.com/forums/...vc=#Post593254 
