I wanted a Speedo/Tach Combo gauge to replace the Tachometer in my tank console. Plus I wanted to remove the HUGE Speedometer off of my handle bar.
Dakota Digital Universal Gauge HLY-3016 Speed/Tach with Indicators is what I went with.
The tank consoles stock gauge whole is 2 1/4 or something like that. I needed a 3 3/8in whole.
Cutting the face off.
Face off of tank console.
Preparing to glue new face on.
Gluing the face on.
Face glued. Whole drilled with wholesaw blade.
Finished whole with dremel.
Applying Bondo-Hair. (Or chocolate as my son called it.)
Put some on the underside too.
Starting the sanding process.
First coat of primer to see where I need to touch up.
You can clearly see the lines I need to fix. More Bondo and Sanding.
