As my bobber project continues, I wanted to minimixe the amount of wiring in the stock harness. There is a ton of wiring I eliminated and trimmed everything down to the essentials, keeping the TPS and Carb Heaters. There is a lot of debate of the need for both, but I decided to keep them since they don't hurt anything and it's only a few wires. Heres a schematic and also a picture of the alomost-complete harness. This has taken a lot more time than I expected and is not for the amateur if you have no wiring/electrical experiance.
Triumph Wiring Schematic by
KOOLWAV, on Flickr
IMG_0075 by
KOOLWAV, on Flickr
