|
|
 Harley Risers - Adapter Studs - SM
|
Joined: Feb 2008
Posts: 2,671 Likes: 15
Loquacious
|
OP
Loquacious
Joined: Feb 2008
Posts: 2,671 Likes: 15 |
I plan to swap out the OEM risers on my 07SM for a set of 4" risers with 1" to 1.5" pullback. H-D risers are a possibility. I prefer not to drill the top tree.
Can anyone recommend a source & specific riser adapter that will work with Harley pattern risers and the SM tree?
Anyone know what size & pitch the 07SM OEM riser studs are?
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2007
Posts: 23,237 Likes: 63
Fe Butt
|
|
Fe Butt
Joined: Feb 2007
Posts: 23,237 Likes: 63 |
10mm 1.25 if I remember right and the HD should be 1/2" 13 kinda fuzzy but I think those were the threads. I am sure on the 10mm for the stock dia. The rest I am hazy on.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2008
Posts: 2,671 Likes: 15
Loquacious
|
|
OP
Loquacious
Joined: Feb 2008
Posts: 2,671 Likes: 15 |
Yes, HD definitely uses 1/2" - 13; if you're sure on the 10mm for the OEM Triumph riser, that's what I want to know.
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2007
Posts: 23,237 Likes: 63
Fe Butt
|
|
Fe Butt
Joined: Feb 2007
Posts: 23,237 Likes: 63 |
Yes, I am 100% sure on the 10mm and about 90% on the pitch being 1.25.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2008
Posts: 2,671 Likes: 15
Loquacious
|
|
OP
Loquacious
Joined: Feb 2008
Posts: 2,671 Likes: 15 |
Super, thanks. after a bit of research it looks like the Kawi 800/1500 Vulcan-Nomad series also uses 10mm riser bolts... 
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: May 2010
Posts: 5,720
Check Pants
|
|
Check Pants
Joined: May 2010
Posts: 5,720 |
Adapter bolts (1/2x10mm) are out there, I had a set but sold them with a pair of risers web page
Last edited by Ryk; 07/14/2012 3:11 AM.
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2008
Posts: 2,671 Likes: 15
Loquacious
|
|
OP
Loquacious
Joined: Feb 2008
Posts: 2,671 Likes: 15 |
For reference, the OEM riser mount bolts are M10 x 1.25 TP.
Also for reference, Lightning Performance Products LPRBK-KH815 Harley to Kawasaki riser adapters have M10 x 1.5 TP studs on the tree-side.
|
|
|
Re: Harley Risers - Adapter Studs - SM
|
Joined: Feb 2007
Posts: 23,237 Likes: 63
Fe Butt
|
|
Fe Butt
Joined: Feb 2007
Posts: 23,237 Likes: 63 |
I remembered the thread vaguely because I machined my adapters out of stainless. The bolts in the riser caps are stainless too to avoid rust.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
|
|
|
|
