 Cocktail shaker jetting
|
Joined: Jun 2012
Posts: 41
Greenhorn
|
OP
Greenhorn
Joined: Jun 2012
Posts: 41 |
Have some cocktail shakers on the way for my 05 Speedmaster. Also ordered a K&N replacement filter, was going to gut the airbox and remove the snorkel, and remove the AI system. Using the Dinqua's jetting calculater, there is no cocktail shaker option. Not sure which existing exhaust on the calculator they compare best to. Playing around I found myself between 132 and 137.5 suggested main jet. I ordered 135's figuring I would be safe right in the middle. Suggestions?
05 Speedmaster, airbox gutted, BC Cocktail Shakers, 135 mains.
|
|
|
Re: Cocktail shaker jetting
|
Joined: May 2011
Posts: 96
Member
|
|
Member
Joined: May 2011
Posts: 96 |
I'm running 152 mains,AI removed,K&Ns airbox removed with D&D pipes and I also ran Shakers on it. Runs fine, only diff is I have a Procom Don,t know if that makes a difference.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jun 2012
Posts: 41
Greenhorn
|
|
OP
Greenhorn
Joined: Jun 2012
Posts: 41 |
Yeah, for K&N pods it recommends 155's, however I will just be gutting the airbox and using the single k&n filter.
05 Speedmaster, airbox gutted, BC Cocktail Shakers, 135 mains.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jul 2006
Posts: 853
3/4 Throttle
|
|
3/4 Throttle
Joined: Jul 2006
Posts: 853 |
They B&C sent me a 145 main when I bought mine from them
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jun 2012
Posts: 41
Greenhorn
|
|
OP
Greenhorn
Joined: Jun 2012
Posts: 41 |
Quote:
They B&C sent me a 145 main when I bought mine from them
Did you have any other mods to the airbox? Did you end up needing any shims?
05 Speedmaster, airbox gutted, BC Cocktail Shakers, 135 mains.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jul 2006
Posts: 853
3/4 Throttle
|
|
3/4 Throttle
Joined: Jul 2006
Posts: 853 |
I have no air box, K&N pods only. No shims and stock pilot jet. I am at sea level.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Sep 2010
Posts: 322
Adjunct
|
|
Adjunct
Joined: Sep 2010
Posts: 322 |
good thread, I just got cocktail shakers and the FREAK, so I'll be using K&N PODs by this weekend.
I think I'm currently running stock jets, but have in my possession, 160 (came with FREAK), 132.5, 130, 127.5, 122.5, & 120's...geesh.
The calculator, using MISC OPEN PIPES, shows that I will need 150's.
If anyone wants to trade 150s for any of the above mentioned MJs let me know.
"stupid's in the water these days, they're gonna drink it anyways, until they don't know right from wrong..."
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jun 2012
Posts: 41
Greenhorn
|
|
OP
Greenhorn
Joined: Jun 2012
Posts: 41 |
Well I got the exhaust on. So I am de-snorkled,K&N drop in filter, and the exhaust. I have 135 main jets in it. It's running great, although I have some pops and backfires on decel. When behind the bike I see some little blue fire balls coming out the back. Still waiting for my D-tool to arrive to adjust the mixture screws a bit. Then I will remove the baffle in the airbox and drill the bottom hole of the airbox for the dual entry, since my filter is already modified for it. Calculator says I might need 137.5's but well see.
05 Speedmaster, airbox gutted, BC Cocktail Shakers, 135 mains.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Jun 2012
Posts: 41
Greenhorn
|
|
OP
Greenhorn
Joined: Jun 2012
Posts: 41 |
Last edited by speedybrand; 07/12/2012 3:37 PM.
05 Speedmaster, airbox gutted, BC Cocktail Shakers, 135 mains.
|
|
|
Re: Cocktail shaker jetting
|
Joined: Sep 2010
Posts: 322
Adjunct
|
|
Adjunct
Joined: Sep 2010
Posts: 322 |
progress: Cocktail shakers on and they sound excellent. Airbox removed,and digging in to the carbs. Current set up was, 125 Mains w/ Stock needles and 2 shims. Dinquas calc shows with the Freak, open pipes, & no shims I should have 155mains...I'm gonna put in the 160's I have on hand and see what happens
"stupid's in the water these days, they're gonna drink it anyways, until they don't know right from wrong..."
|
|
|
Re: Cocktail shaker jetting
|
Joined: Apr 2009
Posts: 639
Adjunct
|
|
Adjunct
Joined: Apr 2009
Posts: 639 |
I have shakers, K&N pods and running 155/45 jets. I also get a small blue flame with shut off after running her hard. I'd say I'm a tad rich if anything. I put a shim in during spring carb cleaning and she ran like crap in mid range. Immediately took it out. Hope it helps.
Brett
Blue/White, Battery Relocated, 155/45's, AI removed, Cocktail shakers
|
|
|
|
|
