Quote:

Thanks guys. I will live with the wiggle. Rode for about 3 hours today with them and it is not an issue when riding. All is well.



I did not like that wiggle in the throttle grip. The clearance between the
Bar diameter and the grip is too much. I used a .020 thick piece of plastic
Shim stock to make up the difference. It has worked pretty well for the 7 years.

05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter