Bonneville America Forums Forums Technical Forums Accessories ISO Grip Wiggle

Hi there. I just installed the ISO Grips onto my bike today and no issues with the fit or the throttle cables. My question is the wiggle on the throttle grip. Is this normal. On the throttle side, there is a gap between the grip end and the cable housing. It seems to have slotted into the cable housing correctly yet there is about 1/8th inch gap between the end off the grip and the housing. The grip will slide in to be flush or out have the gap. Is this just normal?
There is also a little wiggle in the grip on the bar. The model grip I have is the 6236. I removed the end cap to put on the throttle boss and noticed the inside of the grip is not flush on the bar. Is that normal too? I have never used ISO grips before so just wondering if install error or just normal. Thanks